So, you all know I lust Sidi's and for nearly a decade, I've had virtually zero issues with them....save a buckle I broke after a yard sale crash some years ago which I replaced super easily with a buckle from an older pair (although parts are REALLY easy to get at most shops).

What makes Sidis...and the Dragon SRS in particular...so compelling is how they have been built entirely on a modular 'platform'. Last night at the New Belgium Brewery Short Track event as an example, I noticed my cleat felt a bit loose. Not enough to panic, but noticeable. This morning I investigated and low and behold, my second issue in a decade with Sidis (not a bad track record): A cracked 'base' plate...which is the internally housed mounting plate where the screws of the cleat thread into the shoe. I panicked and thought initially: holy crap: how am I going to get this thing fixed? Then I remembered: Sidi's come apart!...

I first took all the components of the sole of the shoe off. And by the way, all these are replaceable so when you wear out the sole components as an example, you can replace 'em easily. eBay has a zillion vendors selling them. Everything from ratchet straps, soles, mid sole grip pads...EVERYTHING is replaceable.

But as I dug in to try and get that base plate out I discovered...d'oh!: The carbon fiber stiffening plate when peeled away actually doesn't release or give access to the plate! Panic again. (In the picture below, I've already extracted the base plate...and it is located where you see the two parallel access holes in the ball of my foot...directly where you mount the cleat)

But the panic was short lived. I recalled in my foggy memory that if you peeled away the inner sole, you could get access to the base plate. So I took out the padded instep to get access the base sole layer. I tried to peel that mo-fo back, but it was tightly glued. So then I took a small allen key and from the outside of the show and pushed slightly on the inner base plate itself in towards the shoe and VOILA! A little trap door opened. It had been pre cut ingeniously by Sidi into the inner base sole layer just for this purpose of replacement. The plate popped right out into my hands. Check it....

I merely then flipped the plate upside down (there are 4 screw holes in the base plate...only 2 of which are ever used) allowing me to use the undamaged threaded side of the plate...the cause of the cleat slippage was that part of the base plat cracked leaving the screw loose and not able to be re-tightened. Presto! Fixed shoes!