The lightest palette likely ever delivered to Boulder Cycle Sport rolled off the delivery truck last week! That, of course, was the highly anticipated palette of Belgian carbon goodness I spoke about in earlier posts. X-Nights, X-Fries, Crossbows and other goodies were unpacked and assembled for the show room floor including my highly anticipated X-Night frames. When they were 'presented', I got super weepy. Absolutely gorgeous.

I brought 'em home and proceeded to whip out the tape measure. The sizing (58cm) in my case was a 1/2 cm difference from my Rock Lobster frames but my ‘actual’ positioning on the bike will  be nearly identical. The geometry is more slack than the R.L.’s with a slightly higher BB so I’ll more or less end up in the same position…which for me is very ‘forward’ to enable me to be on top of the pedal stroke (think how you power on the flats on top of the stroke) and not necessarily behind it (think how you position yourself when you climb...e.g 'pulling' the stroke).

I wanted to take the time to show off the details of the frame before I get them built. There are SO many details here in the X-Night it’s worth a closer look. So without further adieu, and with the help of my Nikon, check out the X-Night with me!

The 2010 Ridley X-Night in her full glory. All carbon with aluminum sleeves for the bottom bracket, headset and rear drop outs. Claimed weight is 1.25kgs/2lbs 12oz. My 58cm is closer to 3lbs. Compare that to my 3.01 lb Scandium Rock Lobster (~58cm). Oh, and don't forget that includes the 'seat post!'

The paint scheme is unbelievable. They are not just decals applied but carefully sprayed graphics with a good helping of clear coat.

The BB30 bottom bracket on the X-Night assists with q-factor fairly dramatically. I will be running my 2009 SRAM Red cranks utilizing an aftermarket SRAM adapter to insert into the BB30 so I can use my standard BB's from last season (my wallet thanks me).

Freudian? Indeed the seat mast if STIFF! It will be cut to my dimensions and likely the last thing we’ll do when the bike is built.

The X-Night features INTERNAL cable routing! YES! Finally someone listened. You can see the front derailleur cable’s exit hole just above the bb shell. Instead of a roller (used when cables are mounted on the top tube and run down the seat tube, around the roller and up into a traditional road derailleur), the X-Night features this ingenious cable stop seen above.

One burly a_ _ fork! The X-Night’s Oryx fork is maddeningly stout and stiff. It features a 1.25 (upper) to 1.5 (lower) carbon steerer tube making the steering precise and brake chatter virtually non-existent. This is a common problem when using carbon forks and exacerbated with carbon wheels. Even with toe-in capabilities on some of the more progressive brakes like the TRP EuroX Magnesium's, chatter on carbon forks is notorious. The Oryx erases this. 

Another shot of the beautiful paint scheme.

The entrance for the front derailleur internal cable routing. There is an entirely sealed kevlar ‘pipe’ that your cable runs through completely sheltering it from mud.

Quick: What’s missing? See bottom of the post for the answer or try and guess!

Rear tire clearance by the bottom bracket is enormous. Seen above are size 34 Dugasts which leaves ample room for mud clearance. 

And even more clearance by the seat stay yoke where mud often collects due to the brake arms. 

The Oryx fork is no different. Again, mad clearance even with big tires.

If you watch any of the race coverage in Belgium, you know how peanut buttery the mud can get. Hamme Zogge’s course as an example is notorious derailleur shredder and has killed the chances of many a ‘sure winner’. The X-Night has thoughtfully included an ingenious replacement mechanism for BOTH drop outs (not just the derailleur side!). The are made of a plate of 7000 series aluminum bolted on ensuring the stiffness of a non-replaceable hanger with the practicality of a replaceable one.

ANSWER: No bottle cage bosses! This bike is a pure race breed. Super PRO.