Entries in SwissStop (1)
Working on the Reflex rims....
So I took my lunch break today by going into the garage and working on these Reflex rims of mine with the new tubulars all glued on. I had mad issues with the green compound SwissStop brake pads (meant for ceramic and aluminum) due to unbearable squeaking and chatter in the front and rear. Further, I got some glue on the sidewalls of the braking surface of the Reflex rims. I initially swapped out the SwissStops for standard Shimano wet/dry pads for aluminum rims but I am STILL getting unbearable chatter. I got myself a Mavic Brake Surface Stone (per Nick's instructions!) as seen in the picture in this post and worked the rims to death. The stone is more like a big gritty eraser. $29 bucks!! D'oh! I also used some acetone to work out the bit of glue on the rim surface. While a wee bit better, it's still WAY too grabby. Modulation is nonexistent and the choppiness and stutter returns under hard braking. I wonder if it just needs some grit and surface grinding. The Shimano pads work SWEET with my Ceramic Mavic clincher rims.
Any experts out there with advice??
Tuesday, August 21, 2007 at 3:15PM
